Operating Factors Affecting Aluminum Profiles Processing

Aluminum profiles will deform during processing. What aspects cause it? In general, in addition to raw materials, equipment, and tool, the operating methods are also significant. Therefore, we should pay attention to the following aspects during the operation

  1. First, follow the cutting sequence. Rough machining focuses on processing efficiency that itwill cut as much aluminum material as possible inthe least time.
  2. Generally, rough machining usesup-cut milling, while finishing process requestshigh precision, so down milling should be adopted.
  3. Thin-walled aluminum profiles themselves are likelyto deform, so it is necessary topay high attention during deep processing.
  4. When clamping, it should not be too tight or too loose.Therefore,when it is about to be completed, just loosen the clamp a little, the workpiece can recover its shape, and press it gently. It is an operation which highly tests the skill of the worker.
  5. Appropriately considersymmetrical processing. For parts with relatively large machining allowance, you can choose symmetrical processing methods for better processing heat dissipation.
  6. For workpieces with many cavities, we can perform layered and multiple processing.