WELCOME TO INTOP METAL CO., LTD.

The Maintenance of Aluminum Alloy Doors and Windows

1. Push and pull lightly
When using aluminum alloy doors and windows, move gently and push and pull lightly. If you find any difficulties, do not push or pull it rudely, but you should eliminate the fault first.

2. Remove dust accumulation
Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to replace. Keep the door frame clean, especially the sliding groove. Use a vacuum cleaner to remove dust in the groove and door seal strips. When cleaning aluminum alloy doors and windows, do not step on the aluminum frame or hold the frame for support.

3. Remove accumulated water
After raining, please wipe and dry the wet glass and door and window frames in time, especially the accumulated water in the slide. The slide will increase friction after long-term use, so you can add a little engine oil or apply a layer of kerosene oil.

4. Cleaning methods
Aluminum alloy doors and windows can be cleaned with a soft cloth and water or neutral detergent. Do not use ordinary soap and laundry detergent, let alone strong acid and alkaline detergents such as scouring powder and toilet cleaner.

5. Repair and Replacement
The connection parts of the aluminum alloy frame should be checked regularly, and the bolts should be tightened in time to replace the damaged parts. The vulnerable parts of aluminum alloy doors and windows, such as the positioning shaft pins, wind braces, and floor springs, should be checked regularly and lubricated regularly to keep them clean and flexible. Sealing strips and glass glue seals are key structures to ensure the sealing and insulation of doors and windows. If they fall off, they should be repaired and replaced in time.

6. Regular inspection
Frequently check the joints between the aluminum alloy frame and the wall. If there is any looseness over time, it is very easy to cause the overall deformation of the frame, making the doors and windows unable to be closed and sealed. Therefore, if the screws at the joints are loose, they should be tightened immediately. If the screw base is loose, use epoxy super glue to mix a small amount of cement to seal it.
Because you can rest assured, so choose INTOP Doors and Windows to create a warm and happy home with you!